ზეთოვანი საპოხი სპერი, HHS6000PLUS-400MLკვების.მრე

High-performance lubricating oil for extreme speeds

Universal, synthetic high-performance lubricating oil with outstanding lubricating properties thanks to the addition of boron nitride.

Excellent creep behaviour and effective surface protection

The low viscosity enables extremely free movement and friction reduction even at extremely high speeds. Excellent creep properties provide deep lubrication and protection. Effective surface protection against wear and corrosion is produced.

Reliable wear protection

The boron nitride allows a wide temperature range and long-lasting lubricating effect. If the oil lubrication breaks off at higher temperatures (above 180°C), the boron nitride takes over the lubrication up to 1000°C (dry lubrication).

Free of microplastics

Free of silicone, resin, acid and n-hexane

NoticeLubricant is not harmful to health, making it ideally suited for the food processing industry.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.Application areaFor professional use with smallest tolerances, precision parts or even with high temperature loads, such as bearings, chains, joints, springs, sliding rails or Bowden cables.

InstructionsShake can well before use. Thoroughly pre-clean the parts to be treated. Then spray onto the cleaned surface.Chemical basisSynthetic oilOil basisSyntheticColourYellowishSmell/fragranceOdourlessDensity0.834 g/mlDensity conditionsat 20°C, DIN 51757Min. temperature conditions-40 °CMax. temperature conditions180 °CMax. temperature resistance1000 °CMin. flashing point of active ingredient200 °CMin. flashing point200 °CKinematic oil basis viscosity31 mm²/sConditions for viscosity of oil basisat 20°CSilicone-freeYesAcid-freeYesResin-freeYesResistance againstAgingContents400 mlWeight of content333.6 gShelf life from production24 MonthSustainabilityLow-emission/low-pollution